It's Time to Talk About National Minimum Urban Density Standards

What would a policy that requires development to make more efficient use of land and resources (like water, for instance) look like?

Read Time: 6 minutes

May 20, 2015, 7:00 AM PDT

By Eliot Allen

Sprinkler Sprawl

Robynrg / Shutterstock

The California drought has highlighted an impressive disparity in per capita water use across the state's communities, ranging from 50 to 500 gallons per day per person in October 2014 according to State Water Resources Control Board data. A major reason for this difference is residential outdoor irrigation, which is driven in large part by lot size. More yard, more watering—especially in warmer parts of the state. And parcel size, or density, influences not only water use, but other elements of community sustainability as well, from energy use to economic competitiveness.

In the face of global water and climate trends, it therefore seems reasonable to ask whether we can afford to let development density exacerbate conditions and limit our options for achieving greater resilience. Perhaps the time has come to discuss national minimum urban density standards. The rationale for minimum urban densities is simple: in locations where achievement of public policy depends on compactness, the capacity of a finite amount of land in a community is too valuable to use insufficiently, and doing so is detrimental for everyone.

According to the Census Bureau Characteristics of New Housing, the national median lot size of detached, single-family homes completed in 2013 was 9,664 sq. ft., or about 3.4 dwelling units (DU) per net acre, assuming 75 percent net of gross acreage. The median size of the houses built on those lots was 2,384 sq. ft. Each home therefore had an outdoor area of approximately 7,200 sq. ft. (which undercounts because of multi-story houses). Using 2.5 persons per household means each occupant has about 2,900 sq. ft. of outdoor space, or 120 percent of the entire house for each person. And multi-family housing isn't occurring at appreciably high densities; a 2014 National Association of Home Builders survey found new multi-family projects had a median density of about 8.5 DU/net acre (assuming 75 percent net of gross acreage).

The ripple effect of using land this way is enormous, and there is ample evidence of its negative environmental, economic, and social consequences. Alternatively, there is compelling evidence of the benefits of using density proactively to fashion sustainable and prosperous neighborhoods. As density increases, there are generally corresponding decreases in per capita water and energy use, stormwater runoff, and air pollutant and greenhouse gas emissions. As density increases, multi-modal travel becomes more feasible, improving choices for non-drivers and public health through active transportation, as well as cost savings for households. There is also  convincing data that density, when used strategically, can improve economic productivity, real estate values, and business activity. And for local governments, more compact land use lowers per capita infrastructure capital and operating costs and increases tax revenue per acre.

There are already three voluntary national standards for minimum urban densities. These apply to development projects that are seeking green certification at the neighborhood scale. The LEED for Neighborhood Development program requires at least 7 to 12 DU/net acre and 0.5 to 0.8 floor area ratio (FAR) for residential and non-residential uses, respectively, depending on transit service level. The Enterprise Green Communities program requires at least 5 to 15 DU/net acre depending on housing type and community size. And the Living Community Challenge program requires at least 0.5 to 3.0 FAR for all uses in urban zones, or about 10 DU/net acre for residences at the low end. Interestingly, the APA Sustaining Places comprehensive plan standards only address density in qualitative terms, without any mention of the appropriateness of minimums for achieving policy goals.

Minimum densities are already required by some localities and states to support transit investments, enable neighborhood retail, expand housing choices, protect open space, and reduce greenhouse gas emissions. Examples include multi-family zones in Portland, Oregon that require one dwelling for every 1,000 sq. ft. of lot area and TOD districts in Charlotte, North Carolina that require 20 DU/net acre for residences and 0.75 FAR for non-residential and mixed uses. Like many metropolitan regions, Minneapolis-Saint Paul has set long-range targets for minimum densities, in this case 5, 10, and 20 DU/net acre by 2040 for suburban areas, urban communities, and urban centers, respectively. And California greenhouse gas reduction legislation offers TOD projects that achieve 20 DU/net acre or 0.75 FAR streamlined environmental reviews.

At the federal level, the closest to a minimum density standard is the Federal Transit Administration (FTA) land use rating criteria for projects seeking FTA 'new start' funds. A transit station area must have 2,560 to 15,000 persons/sq. mile to achieve low to high ratings, respectively, or about 2 to 8 DU/net acre (for reference, the Census Bureau breakpoint between urban and suburban land use is approximately 3,200 persons/sq. mile, or about 3 DU/net acre).

What would a national density standard look like? How would it be developed and by whom? And under whose sponsorship? The HUD-DOT-EPA Partnership for Sustainable Communities could be one candidate for leading such an effort, perhaps in collaboration with a standards organization like the American National Standards Institute. Using an advisory group of experts, a recommended set of standards should be possible to draft in a year. The additional time required for federal rule-making or legislation becomes a question of political resolve; at least 3 to 4 years seems a reasonable estimate, depending on the severity of other intervening water and climate crises.

If it started now, the federal government could theoretically produce authorized standards by 2020 that, in broad strokes, could be:

  • Organized in a hierarchy of Census regions, community sizes, and place types. One size would not fit all, but in round numbers, a region-weighted national minimum for general urban neighborhoods in medium-size cities seems reasonable somewhere around 8-10 DU/net acre and 0.75 FAR, which are enough to confidently support investments in multi-modal travel. As with auto fuel efficiency standards, the land-use minimums could be set to gradually increase over time.
  • Applied to residential and non-residential uses inside municipal and urban growth boundaries where public policy and investments are premised on compactness and its benefits (e.g., transit corridors and neighborhood-serving retail catchment areas).
  • Calibrated to existing conditions to ensure that minimum densities are feasibly attainable. The EPA Smart Location Database and Census Bureau data already provide a national density baseline down to the block level.
  • Phased, beginning with a voluntary adoption phase that incentivizes early adopters with enhanced eligibility for federal housing, transportation, water, and wastewater funding. This would be followed by a mandatory adoption phase when, to maintain federal financial assistance eligibility, minimum densities would have to be incorporated into the next update of municipal comprehensive plans and zoning ordinances.

Local adoption is likely to accelerate when municipalities begin to experience the positive benefits of minimum densities. Assuming we start now, and allowing a decade for national implementation after authorization, the standards could be fully adopted by the nation's 19,000 municipalities by roughly 2030. Yes, there are thousands of obstacles and devils lurking in the details of the concept, but we've proven it's realizable with national air and water quality standards. There’s no reason to believe we can't achieve the same outcome with our equally-valuable urban land resources.

In the last century, Jane Jacobs described density as "a great and exuberant richness" propelling cities. In this century, density appears to be one of the most critical levers we have for also imbuing cities with an equally great resilience.And the drought in the West should be a wake-up call for a national discussion about ways that minimum urban densities can help secure a sustainable future for the next century.

Eliot Allen, LEED AP-ND, is a principal of Criterion Planners of Portland, Oregon and a curator at

Additional Reading

  • Building Better Budgets, Smart Growth America
  • Characteristics of New Housing, Census Bureau
  • Fiscal Implications of Development Patterns, Smart Growth America
  • Growing Cooler, Urban Land Institute
  • Our Built & Natural Environments, U.S. EPA
  • Smart Growth & Economic Success, U.S. EPA

The Top Urban Planning Books of 2022

An annual list of the must-read books related to urban planning and its intersecting fields.

November 28, 2022 - James Brasuell

Musician playing guitar in front of outdoor seating and sidewalk vendors in Houston, Texas

Houston Development Aims to Create Hyper-Walkable, Micro-Living Neighborhood

The 17-acre Second Ward project has spurred both optimism for a more walkable city and concerns about displacement and gentrification.

November 21, 2022 - Houston Chronicle


Anchorage Eliminates Parking Requirements Citywide

Anchorage is the latest city to enact sweeping parking reforms, in another blow to the car-centric status quo of planning.

November 23, 2022 - Anchorage Daily News

Bus stop in Boulder, Colorado with snowy tree and snowy mountains in background

Colorado Free Transit Program Boosted Ridership

Many local transit agencies that took advantage of a state program that funded free fares throughout August have seen increased ridership even beyond the program’s end.

3 hours ago - The Colorado Sun

University Ave and Dundas Street in downtown Toronto

Canada's Car Commuting Roars Back as Transit’s Rebound Remains Slow

Car commuting rates are returning to pre-pandemic levels, while public transit and active transportation rates are slower to recover.

4 hours ago - The Globe and Mail

Aerial view of Yountville, California in Napa County

Napa County Announces Forgivable Loans for Affordable ADU Rentals

Homeowners in the county will be eligible for the loans if they comply with affordability requirements for five years.

5 hours ago - Napa Valley Register

Urban Design for Planners 1: Software Tools

This six-course series explores essential urban design concepts using open source software and equips planners with the tools they need to participate fully in the urban design process.

Planning for Universal Design

Learn the tools for implementing Universal Design in planning regulations.